KZJnazem 812N Max. 5% Sodium Sulfates
KZJnazem 809N Max. 18% Sodim Sulfates
KZJnazem RS86 Naphthalene-based Water Reducer for C15-C60 Pile, Precast, Grouting Concrete
KZJnazem RR86 Naphthalene-based Superplasticizer for C15~ C50 Ready Mix Concrete with Adjustable Time Setting Properties
KZJnazem RS86 and KZJnazem RR86 are ready to use liquid admixtures
Why has PNS/SNF high dispersion at low water/cement ratio and well adaptive to recycle aggregate materials in concrete.
The sulphonic groups of the polymer chains increase the negative charge of the cement particle surface and disperse these particles by electrical repulsion. This electrostatic mechanism causes the cementpaste to disperse and has the positive consequence of requiring less mixing water to abtain a given concrete workability. The rapid growth of hydration crystals will change the surface mechanical of the particles and set the free dispersion of them.
The average dosage of KZJnazem RS86 and KZJnazem RR86 are usually 1.0~2.5% based on cementitious materials situation, namely approximately 1.0– 2.5litre per 100 kg of cementitious material. Addition rates can vary with type of applications at deffirent temperatures and the optimum dosage may depend on the specific requirements of concrete and materials. At a given W/C ratio, the slump required for placement can be controlled by varying the addition rate.
Remarks:
KZJ PNS&SNF, Aliphatic products are non-toxic, non-irritative, non-radioactive, non-flammable and non-corrosive to steel bar.For detailed Health, Safety and Environmental recommendations, please consult and follow all instructions in our MSDS.
Based on KZJnazem 809N, KZJnazem 812N and KZJspirit 300, KZJ R&D engineers have developed the two types of ready-to-use Naphthalene-based concrete admixtures of KZJnazem RS86 and KZJnazem RR86) below for C15-C50 ready mix concrete, precast concrete, pile concrete & grouting concrete.
No layering and sedimentation in long-time storage.
